Do not ignore the detection of static indicators when purchasing antistatic products
In the process of production and processing, the manufacturing industry pays more and more attention to the protection measures against static electricity. When purchasing anti-static consumables, the detection of static electricity indicators is often neglected, so that the anti-static products bought are in compliance with the requirements, because of this error. The understanding has led to the existence of electrostatic accidents. In contact with many customers who have problems, most of the problems are that there is no personal protective equipment, static elimination equipment and packaging containers to be used. I hope that everyone will implement the ESD solution, if not strictly Control is likely to fail to achieve the desired results.
Accidents that may occur without static electricity detection:
1. The equipment for eliminating static electricity has not been tested for a long time. It is very likely that it does not have the function of eliminating static electricity. For example, the ion fan. If the ion fan is not used to balance the time required for the ion fan to eliminate static electricity, it is impossible to judge whether its function is completely Meet the requirements.
2, anti-static shoes, wrist straps, to pass the human body comprehensive tester to measure whether it passed, failed to pass, indicating that the human body wear anti-static shoes, wrist straps also invalidate the release of static electricity, people are likely to produce extremely high voltage when walking.
3, turnover, packaging containers should be strengthened to control, because these anti-static supplies are likely to be in direct contact with the product, if the requirements of the static indicators are not met, the safety of the product will be compromised.
The static electricity detector is as fair and just as the judge can handle the case. If there is no static electricity detection instrument, let the supplier say that it is very wrong, and the conditions permit to match the detection instrument as much as possible. The measurement parameters that are seen as the truth are the most realistic.