Electronic factory clean room protection measures
Electronic factory clean room instructions
1. Before entering the clean room of the electronics factory, you must inform the administrator and pass the basic training.
2. Entering the clean room of the electronics factory is strictly prohibited from smoking, eating (drinking) food, foreign things (such as newspapers, magazines, pencils, etc.) are not allowed to be carried in, and noisy running and reunion are strictly prohibited.
3. Before entering the clean room of the electronics factory, take off the shoes at the specified places, put the shoes in the shoe cabinet, put the outer clothes in the closet, and put the personal items in the private cabinet. No food can be placed in the cabinet.
4. Enter the electronics factory clean room must first in the locker room, the mask, dust cap, dust-free clothes and shoe covers are neatly dressed according to the rules, then the dust is washed in the air cleaning room, and the dust-removing carpet is stepped on the floor of the washing room. ) have to enter.
5. When wearing a mask, wear a mask over the nose to cover the nose and mouth to avoid contamination of the chip during breathing.
6. Wear dust-free clothes, and clean the clothes and hair before the dust-free caps, so as not to be cleaned and uncomfortable after wearing the dust-free clothes.
7. After cleaning up, wear a dust-free cap and the principle of wearing a dust-free cap:
(1) The hair must be completely covered in the cap and must not be exposed.
(2) Under the dust-free cap, the pendulum should be spread over the shoulders. After putting on the work clothes, it will not get rid of the naked shoulders.
8. After the dust-free cap is worn, the dust-free clothes should be cleaned. The dust-free clothes should be fit and proper, so that the pants or sleeves are too short and the skin is bare. When laying clothes, please pay attention to the underside of the cap. State, dust-free clothes can not be reversed.
9. After wearing a clean clothes, only the shoe cover, pull the shoe cover and level the shoe cover, and indeed cover the pants.
10. When wearing gloves, avoid touching the palm of your hand and the fingertips with your bare hands (to prevent sodium ion contamination). After putting on the gloves, put the wrist of the glove in the sleeve to isolate the source of pollution.
11. After the dust-free clothing is in place, wash the dust and step on the dust blanket to enter the clean room.
12. Regardless of entering or leaving the clean room, you must remove the dust-free clothes in the locker room as required. Do not use it in other areas, especially in the clean room.
13. Clean clothing, shoe covers, etc., should be cleaned regularly, damaged, and should be replaced when the line is off.
14. When taking off the dust-free clothes, the order is the opposite of when you wear them.
15. The dust-free clothing that has been taken off should be hoisted and placed in the upper cabinet of the locker room; the shoe cover should be placed under the hanged dust-free clothing.
16. In the small cabinet of the dressing room, no other items should be placed except for the provisions such as dust-free clothes.
17. Except for paper and articles, no other items may be carried into the clean room.
18. Do not carry a clean room, such as a dust-free garment, and place it in the prescribed space after use.
19. Masks and gloves may be stored or reused as they are visible.
20. Anything that enters the clean room must be wiped clean with a sprinkler.
21. If any equipment enters, please inform the manager and wipe it clean in a dust-free room before entering.
22. Instruments that have not passed the test are forbidden to use. In case of emergency, they should be properly treated according to emergency procedures, such as turning off water, electricity, gas and other switches.
23. There must be no fire in the clean room to avoid accidents.