Electrostatic precipitator manufacturers win the market with gold technology
Shenzhen Anlite Technology Co., Ltd. understands that when the dust filter bag is pulsed
and cleaned, the flat bag is more deformed than the round bag. Therefore, when the bag is
retracted, the collision with the dust-removing frame is stronger, and the dust is
generated. More, and the dust that escapes from the flat bag when it is cleaned migrates to
the adjacent bag more seriously than the round bag. First, the length of the dust filter
bag, in the case of the same amount of flue gas, filtration speed and the diameter of the
dust filter bag, increase the length of the dust filter bag can reduce the number of dust
filter bags, thereby reducing the footprint and reducing the electromagnetic system of the
cleaning system. Valves, pulse valves, blowpipes and other components save investment and
shorten the cleaning cycle.
When the electrostatic dust filter bag is cleaned on the line, the longer the dust filter
bag is, the more likely it is to return the bag dust to the bag. If it is off-line, the
longer the dust filter bag, the longer the pause time after cleaning. The slower the
recovery of the ash compartment is filtered. When the dust filter bag is cut, it is best to
use the electric iron to iron (with 1500W electric iron) to prevent the latitude and
longitude lines from loosening. The sewing thread must be used with the same performance.
The dust filter bag polyester, polypropylene and vinylon are identified by the relevant
health department. It is used in food, pharmaceutical and other industries for human health
without side effects. The dust collector bag food, the pharmaceutical industry uses warm
water before using the dust bag. Rinse, so as not to bring dirt on the cloth surface,
(wash), (concentration depends on the situation) to soften the cloth body, restore the
hydrophobicity and gas permeability of the dust filter bag, and improve the use rate of the
dust filter bag.
Why is the dust collector bag vulnerable to damage?
Why is the dust collector bag easy to damage? Why is the dust collector bag easy to damage?
According to our company experience, the following points are summarized:
1. Determination of the wind speed The determination of the filter wind speed of the dust
removal equipment is too high, which is one of the main reasons for the damage of the dust
collector bag. For example, some manufacturers blindly reduce the cost of equipment and add
profits. When designing the bag filter, the filter wind speed is increased. In a short
period of time, the user has no obvious difference, but the service life of the bag is
greatly shortened. Therefore, not only does the customer not save money, but also brings a
large economic burden and affects the benefit.
2. Selecting the temperature at the time of operation accurately Selecting the dust
filter bag that responds to the dust temperature is the key to whether the bag can operate
normally. The dust bag selected for use exceeds the normal operating temperature, and the
filter bag shortens the service life and will be short. Damage in time. Therefore, when
selecting the filter bag, it is necessary to determine the inlet temperature of the dust
collector, and select a filter bag of a suitable temperature.
3. Quality and quality of cloth bags In recent years, some small manufacturers use small
sewing machines as processing equipment, and use inferior quality materials as raw
materials during processing, so that the dust-removing cloth bags can be opened, cracked,
and bottomed in a short period of time. And so on. Pay attention to the quality of the
product when choosing a dust bag.