Anti-static facilities for electronic products
1. Anti-static safety workbench
a. The anti-static safety workbench is the basic component of the anti-static work area. It consists of a workbench, an anti-static table mat, a wrist strap connector and a ground wire.
b. There should be no less than two wrist strap connectors on the anti-static table mat, one for operators and the other for technicians, inspectors or other personnel.
c. When necessary, the anti-static safety workbench should be equipped with an ion wind static eliminator.
d. Plastic boxes (sheets), rubbers, cardboard, glass and other sundries that are prone to static electricity are not allowed to be stacked on the anti-static safety workbench. Drawings and materials should be placed in anti-static document bags.
2. Anti-static wristband
People who directly contact electrostatic sensitive devices should wear anti-static wristbands. The wristbands should have good contact with human skin. The wristbands must not irritate or have allergic effects on the human body. The resistance value of the wristband system to ground should be within the range of 106~108Ω. 3. Anti-static container
During the development and production of electronic equipment, all containers for storing and circulating SSD (component bags, transfer boxes, printed circuit board racks, component storage boxes, etc.) should have electrostatic protection performance. Metal and ordinary plastic containers are not allowed. If necessary, the turnover box used to store components should be grounded.
4. Ion wind static eliminator
Purchase ion blower, ion wind nozzle, ion wind snake and other static eliminators





