How To Clean The Management Of Clean Clothes

Mar 30, 2019 Leave a message

                                           How to clean the management of clean clothes

Clean clothes are widely used in various clean room environments, and cleaning and maintenance of dust-free clothes is very important.


Clean clothes should pay attention to their own management. The most important part of the management of clean clothes is cleaning. Although the clean clothes fabric is a clean fiber that is difficult to stain, it is easy to be soiled if it is washed by ordinary washing. A special method must be used.

Normally, clean clothes are washed at least once a week, and some high-demand jobs are even washed once a day. Clean clothing must be cleaned in a clean room to avoid adhesion of dust and bacteria and contamination by detergents.

Cleaning of clean clothes is generally done by professional cleaning companies. The following matters should be noted in the clean room cleaning process:

  1. Clean the accessories such as scratches, damages and buckles before washing, and repair, replace or scrap the defective ones.


2. It is necessary to clean, dry, and bundle clean clothes in a clean room that is cleaner than the clean room in which the overalls are used.

3, the newly-sewn dust-free clothes can be directly washed, and the dust-free clothes recovered through the oil are found, and the oil should be carefully removed before the washing process.


4. The water used for wet and dry cleaning should be filtered. The solvent should also be distilled. Use a filter with a pore size of less than 0.2 μm at the point of use, and filter more than once as needed.


5. In order to remove water-soluble contaminants, after washing with water, the distilled solvent is used for final washing to remove oily contaminants.

6, wet washing water temperature is as follows: polyester cloth 60-70C (up to 70C) nylon cloth 50-55C (up to 60C)


7. When the final rinse is permeable, an antistatic agent may be used to improve the antistatic property, but the selected antistatic agent should be well combined with the fiber, and no dust is peeled off.





8. Dry in a clean air circulation system dedicated to washing. After drying, it is stacked in a clean cleaning room and placed in a clean polyester bag or nylon bag. It can be double-layered or vacuum-sealed according to requirements. The packaging material is preferably made of antistatic material. Since the folding process is the most dust-prone, the folding process must be carried out in a high-level purification space. For example, the folding package of the 100-level clean overalls should be carried out in a 10-level environment.

The washing of clean clothes should be carried out in accordance with the above methods to ensure the use effect and longevity of the clean clothes.