How To Eliminate Static Electricity During The Use Of Ion Fan

May 04, 2020 Leave a message

How to eliminate static electricity during the use of ion fan

Our Anti-Static Equipment Factory specializes in the research, development, production and sales of ion blowers, ion wind rods, ion wind snakes, ion wind drums and other static elimination equipment and testing instruments. Years of experience in solving industrial static electricity problems

One way ion fan is highly balanced and suitable for long-distance transmission using air flow. At the same time, because of the large ion gap (low concentration), the static elimination time is long. The direct current method is that there are two sets of positive and negative discharge needles with high voltage to ionize the air, which is easy to cause ion imbalance and there will be the phenomenon of ion neutralization during transmission. Medium and short distances can achieve a high degree of static elimination effect. It is well known that the principle of ionization of ion fans is to use high-voltage tip discharge to generate ions to neutralize static electricity on objects. Then the difference in ion output mode will inevitably cause the difference in addition to static electricity. This difference is the difference in the quality of ion fan products. Ion output mainly includes sine wave AC mode and traditional DC mode, that is, we often say two kinds of AC ion fan and DC ion fan. The widely used AC method is to ionize the air with the tip of the discharge needle of the same group of high voltage, and generate positive and negative ions of different polarities alternately.

How to eliminate static electricity in ion fan is also different.

1. The production process equipment should use static electricity

Conductor or electrostatic sub-conductor, avoid using static non-conductor.

2. The relative humidity of the local environment should be increased to more than 50%.

3. Operating tools made of electrostatic conductors at the production site should be grounded.

4. In some materials, a small amount of suitable antistatic additives can be added to reduce its resistivity.