How to eliminate static electricity on the human body?
The electronic processing industry is currently demanding more and more static discharge. Generally, factories wear anti-static wrist straps and anti-static shoes. Anti-static clothing is the best way to discharge static electricity, but some customers still report that the effect is not good. Obviously, it was discovered from the customer's production site that there were many reasons that made the effect not obvious.
1. The anti-static wrist strap worn on the hand must be connected to the grounding wire of the earth, and no disconnection is allowed. It is best to match the wrist strap online monitor, otherwise it will lose the function of releasing static electricity. The factory did not notice whether the wrist strap was actually connected to the earth. If it was not connected, the function of the wrist strap would be lost.
2. When wearing anti-static shoes, be sure to check whether the anti-static socks and anti-static insoles can meet the standards. You can enter the production workshop only after passing the test with a human body comprehensive tester. If the test fails, it means that there is static on the human body and cannot pass the anti-static Electrostatic shoes discharge static electricity on the ground, and they can't play their due role, just like a dummy.
3. When the wrist strap is plugged into the grounding socket or clamped to the ground bus, it must be checked whether it is connected to the ground, and the grounding is good to effectively discharge static electricity.
4. Try not to use a cordless wrist strap. The effect is far inferior to that of a corded wrist strap. The price is not very different. It is really unconditional to use a cordless wrist strap.
5. For important R&D departments, when wearing anti-static wrist straps, apply anti-static hand cream to your hands as much as possible to keep the skin surface moist and achieve better release.
6. The conductive wire on the inner side of the anti-static wrist strap should be in close contact with the skin. Fasten the elastic band as much as possible to avoid excessive looseness which will cause the contact resistance between the skin and the wrist strap to increase.