How To Judge Whether The Anti-static Shielding Bag Has Failed

Jun 15, 2020 Leave a message

How to judge whether the anti-static shielding bag has failed?


Anti-static shielding bags are more commonly used for outer packaging of circuit boards, precision parts and electronic components sensitive to static electricity. It can protect electrostatic sensitive components to the greatest extent from potential electrostatic hazards. Their unique Faraday cage construction forms an "induction cover" effect, as well as shielding and anti-static effects on the contents of the bag.


But anything has its own particularity. For example, the anti-static shielding bag may fail. Do you know how to judge that the anti-static shielding bag has failed?

In the MIL-B-81705C standard document, if any of the following conditions is met, it can be regarded as invalid:

1. If the layering phenomenon detailed in Section 4.8.4.1 appears.

2. The attenuation rate of electrostatic discharge is greater than 2 seconds.

3. The attenuation of electromagnetic interference is less than 10dB.

4. There are small holes in the bag and the diameter is greater than 2mm.

5. The electrostatic discharge events below 30kV cannot be shielded.

6. The surface resistance per square area inside and outside is greater than 10^12, and the internal resistance per square area is less than 10^5.


In short, due to the Faraday effect, if there are creases or small holes in the anti-static shielding bag, it is better to throw it away and not to damage the parts inside because of the cost of the bag.