How to keep anti-static clothing clean
Anti-static clothing is often used in bioengineering, pharmaceutical, R&D, semiconductor and other enterprises that require a higher degree of cleanliness. The production sites of these enterprises require a very low dust content in the production environment.



The fabric of anti-static clothing is generally a synthetic fiber fabric inlaid with conductive silk. Although the fiber itself is a clean fiber that is difficult to get dirty, how to maintain it is an important factor, that is, the method of cleaning. Of course, if the ordinary washing method is used, it will be soiled on the contrary. So special methods must be used. Clean work clothes, from the perspective of management, must also be cleaned and packaged in a clean room when cleaning.
Usually, clean work clothes are washed at least once a week, and some demanding types of work are even washed once a day.
When cleaning in an ordinary room, dust and bacteria will adhere, as well as contamination by cleaning agents. In addition, there is a risk of dust and microorganisms adhering during packing and transportation.
The cleaning of anti-static clothing is generally carried out by professional cleaning companies. The matters that should be paid attention to in the cleaning process of the clean room are as follows:
(1) The newly sewn clean work clothes can be washed directly, and if oil stains are found in the recycled clean work clothes, the oil stains should be carefully removed before the washing procedure.
(2) Check the accessories such as scratches, damages and buckles before washing, and repair, replace or scrap the defective ones.
(3) Cleaning, drying and packing must be carried out in a clean room with a higher cleanliness than the clean room using work clothes.
(4) The water used for wet and dry cleaning should be filtered, and the solvent should be distilled after the filter membrane with a pore size of less than 0.2 μm is used at the point of use, and the filtration is performed more than once as required.
(5) In order to remove water-soluble pollutants, after washing with clean water, the final washing with solvent is used to remove oily pollutants.
(6) The water temperature for wet washing is as follows: polyester cloth 60-70C (maximum 70C) nylon cloth 50-55C (maximum 60C)
(7) Work clothes with buckles should be washed in the buckled state.
(8) Drying is carried out in a clean air circulation system dedicated to washing.
After drying, fold it in a special clean room for washing, and put it into a clean polyester bag or bone pocket. It can be double-packed or vacuum-sealed according to requirements. The packaging material is preferably made of materials with good antistatic properties. Since the folding process is the most likely to generate dust, the folding process must be carried out in a high-level clean space.

