How To Prevent Static Electricity In Industrial Production

Mar 12, 2019 Leave a message

How does industrial production prevent static electricity? To prevent static electricity, first try not to generate static electricity; the static electricity generated should be limited as much as possible so that it is not dangerous. Second, the generated charge is leaked or neutralized as quickly as possible, thereby eliminating a large accumulation of charges. under

How does industrial production prevent static electricity? To prevent static electricity, first try not to generate static electricity; the static electricity generated should be limited as much as possible so that it is not dangerous. Second, the generated charge is leaked or neutralized as quickly as possible, thereby eliminating a large accumulation of charges. The following anti-static ion fan experts will introduce you to the method of industrial production to prevent static electricity.



Reduce friction and electrification


At present, the standards for controlling the flow rate in various countries in the world are not uniform. When determining the flow rate, not only the inner diameter of the pipe, but also the nature of the fluid, the composition and quantity of the impurities contained, and the material of the pipe, etc., should be considered. The flammable liquid flowing in the pipeline, even if it has a high average charge density, often does not show a high voltage due to the large capacitance in the pipeline, and it does not cause air in the pipeline because it has no air. Burning and exploding. In this case, although static electricity does not pose a danger inside the pipeline, its serious hazard is mainly at the exit of the pipeline, which must be taken seriously.


Static ground


The role of electrostatic grounding is to discharge the charge that may accumulate on the conductor, so that the conductor is equipotential to the earth, so that the potential difference between the conductors is zero.


Reducing resistivity


When the resistivity of the substance is less than 106 Ω·cm, the accumulation of static charges can be prevented. Ways to reduce resistivity:

A. Adding a conductive filler;

B. Use an antistatic agent.


Increase air humidity


When the relative humidity of the air is above 65-70%, the surface of the object tends to form a very thin film of water. The water film can dissolve the CO2 in the air, so that the surface resistivity is greatly reduced, and the static charge is less likely to accumulate. If the relative humidity of the surrounding air drops to 40 to 50%, the static electricity is not easily dissipated, and it is possible to form a high potential. A common method of increasing the humidity of the air is to spray water mist into the air. Rotary fan sprayers are generally used, but the machine is not explosion-proof and must be blown from outside the wall.


Air ionization


By using a static eliminator to ionize oxygen and nitrogen ions in the air and turn the air into a conductor, the static charge on the surface of the object can be effectively eliminated. Commonly used static eliminators are: (a) inductive static eliminator; (b) high voltage static eliminator.

How to prevent static electricity in industrial production, the above is an introduction to the method of preventing static electricity in industrial production.