How to reduce the adverse effects of static electricity on printers
Printers are indispensable equipment for corporate offices, but due to the interference of static electricity, they will cause many problems, such as crashes, paper jams, etc. Static electricity has a huge impact on printers, and may seriously damage the motherboard and nozzles. If this happens for a long time, the printer will be damaged. However, if the printer is properly protected against static electricity and properly maintained, these problems can be greatly avoided.
1. The printer must be well grounded to prevent excessive voltage due to accumulation of static charges.
2. You can usually use an esd brush to clean the dust in the gaps of the printer.
ESD brushes,Anti-static Brushes
3. In the dry season, you can use anti-static spray to spray it regularly to eliminate static electricity on the surface of the printer in time.
4. When using the printer, try to use ink with a higher viscosity, so that the antistatic effect will be better, because the larger the weight of the ink droplets, the more static films will be produced.
The smaller the sound.
5. The humidity around the place where the printer is placed should reach a relative humidity of 40%-60%.
6. When operating the printer, you need to keep the indoor temperature as stable as possible, do not fluctuate high and low, and pay attention to changes in temperature and humidity.
The problem of static electricity in the printer cannot be ignored. If you need to do a good job of maintenance and care on a daily basis, you can avoid the adverse effects of static electricity and greatly improve the use of the printer.
efficiency and longevity.