Human Body Electrostatic Discharger

May 31, 2019 Leave a message

What to pay attention to when installing a human body electrostatic discharger


So what are the precautions when installing? Let's explain the following ESD technical consultation:

1. This device must be connected to the characteristics (objects) connected to the ground wire.

2. During the installation process, conditions must be met to avoid open fire and avoid accidents.

3. Before installation, it is necessary to check whether the semi-conductive touch body and the connecting part are damaged. It is strictly forbidden to install and use the damaged point.

4. For every 25 meters of walking during normal human body travel, the static electricity generated by the human body will be higher than the small ignition energy (0.2mJ) of the oil vapor. It is recommended to install one product at intervals of 25 meters.

5. Keep the human body in contact with the semi-conductive touch for 10-15 seconds during normal use to achieve the purpose of completely releasing the static electricity of the human body.

6. Keep the explosion-proof electrostatic discharge touch body clean during use.