Installation and operation guide for each type of ion fan
There are many types of ion fans, and different types of ion fans have different installation methods.
1. Installation of horizontal ion fan
Place the ion fan directly on the workbench, or hang it above the workbench, start the ion fan after power-on, adjust the airflow to the working area where static electricity is removed, and tighten the screw buttons on both sides of the ion fan to start working.
2. Installation of suspended three-head ion fan
Hang the ion fan at a suitable height, then adjust the direction of the airflow and the size of the air volume to the working area that needs to be statically removed, and then you can start the operation.
3. Installation of desktop ion fan
Put the ion fan on the workbench, connect the power source to start the ion fan. Adjust the airflow generated by the ion fan to the working area that needs to be static, and then tighten the knobs on both sides of the ion fan to work. The desktop ion fan can also be suspended.
Specific operation:
Rotate the governor clockwise until the indicator light is on, which means that the ion fan has started, and the wind speed of the ion fan is increased after the ion airflow is generated. Rotate the governor counterclockwise to the "off" position. At this time, the indicator light is off to indicate that the ion fan has stopped working.