A basic common sense, different grounding lines have different functions. If you think about the actual effect of static electricity prevention, it is better to connect anti-static ground wire. Some enterprises do not have real anti-static grounding for cost considerations. The grounding wire of the equipment is even connected to the water pipe or to a ground of a three-phase circuit. It is recommended that everyone grounded must be connected to the special ground for anti-static, because the equipment ground, lightning protection ground, and lighting ground, they have their own balance point, this balance point with us Different, it will form a voltage drift, or zero drift, in fact there is no real ground. The principle of the anti-static grounding wire is mainly used for the connection between the anti-static mat and the grounding socket to effectively discharge the static electricity generated by the human body or the mat during production to the earth.
Some enterprises, in order to make the grounding line simple, especially the temporary construction line, after laying the anti-static mat, the grounding wire is connected to it, such as the five-star claw or the buckle, especially the lower terminal, in the grounding When the wire is attached, it uses an alligator clip. Although it saves trouble, we recommend that the grounding must be done with the terminal, just like screwing on the screw, so that the lock will not be disconnected. If you use the alligator clip, who? If you touch it, the line will be broken. However, we often don't notice it. In this way, the anti-static mat is actually laid, so that the ground wire is connected, and actually it is disconnected.
When using and purchasing anti-static mats, you will encounter such small problems. This is also the technical problem we have in the industry during the sales process and the customer communication process. I will give you an introduction and help you understand. a bit.
