Ion air gun instruction manual
Ionizing air gun is a hand-held special equipment to eliminate static electricity. It is a kind of static elimination products that use compressed gas series. It has the characteristics of easy installation, stable work, strong wind speed, and rapid elimination of static electricity.
Principle of action
The ion wind nozzle can generate a large number of positive and negative charge air masses, which can be blown out by the compressed air, which can neutralize the charge on the object. When the charge on the surface of the object is negative, it will attract the positive charge in the airflow. When the charge on the surface of the object is positive, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized. , To achieve the purpose of eliminating static electricity, high-speed compressed air can also blow away the stubborn dust on the object.
Features
1. Neutralize static electricity quickly.
2. Large area covered by ion airflow.
3. Wide adjustment range of wind power.
4. The air gun has good grounding protection.
*The static elimination time complies with the ESD standard. The static elimination time is measured from a test voltage of 5000V to 500.
*The test instrument uses ME268A electrostatic comprehensive tester.
*Test data will vary due to changes in ambient air temperature and humidity.
Safety instructions
1 Read the operating instructions before installation and operation.
2Before operation, it must be grounded reliably.
3 Air guns cannot be operated in flammable and explosive environments.
4 Do not make fine repairs without authorization.
Installation and operation
The ion air gun should be used together with a high-voltage generator. Insert the end of the air gun cable into the high-voltage output jack of the high-voltage generator, turn it clockwise to the end, then connect the ground wire of the air gun cable to the grounding pole outside the high-voltage generator, and after confirming that the ground is good, connect the high-voltage generator Plug the plug into the socket with a grounding wire (pay attention to the voltage used by the high-voltage generator), compress the air on the air gun street, and turn on the power of the high-voltage generator to work.
Note: If necessary, you can choose to install an air filter.