Is It Okay To Use ESD Pink Bubble Bags To Place Circuit Boards

Oct 09, 2023 Leave a message

Is it okay to use ESD pink bubble bags to place circuit boards?
If the pink foam is static-dissipative and electrically grounded, it can generally be used. But it really depends on the ESD sensitivity of the product you want to protect.

esd bubble bag

esd bubble film

ESD double bubble bag

To measure the resistance to ground (RTG) of antistatic foam, you can use the AAC-TR-800 megger. Try measuring at 10V and 100V. For safety reasons, the resistance should be controlled at 105~109 ohms. You said you measured it with an electrostatic field tester, which is OK, but doesn't completely ensure that the foam is safe. The more important criterion is that the work surface must discharge the static charge within 100 milliseconds. If it takes several seconds to clear static electricity, that's too long and could put your ESD-sensitive devices at risk for an ESD event. Of course, there are other materials available to place WIP (work in progress) on the workbench to achieve both static protection and anti-slip properties. For example, anti-static desk mats are an excellent choice in this regard.

Some questions you need to pay attention to during the control process: What is the electrostatic sensitivity of the part I am trying to achieve ESD protection? Is the foam conductivity at a safe dissipation level? Can the foam release its charge in about 100 milliseconds? Has the bubble been grounded? Has the operator worn the anti-static wrist strap correctly? If all of these questions are yes, then you have taken some effective ESD prevention measures.