Precautions when using anti-static mat
Anti-static mats are also known as anti-static mats, anti-static rubber sheets, anti-static rubber sheets, etc. The antistatic rubber is mainly made of antistatic (conductive) electrostatic material and dissipative electrostatic material synthetic rubber. It is commonly used as a 2mm double-layer composite structure, the surface layer is a dissipative electrostatic layer of about 0.5 mm thick, and the bottom layer is a conductive layer of about 1.5 mm thick. Anti-static mats are mainly made of a variety of processes using conductive materials, static dissipative materials and synthetic rubber. The top layer is a static dissipative layer of about 0.3-0.5 mm thick, and the bottom layer is a conductive layer of about 1.5-1.7 mm thick. The mat has a long-lasting use, has good acid, alkali and chemical resistance, and is wear resistant and easy to clean.
1. The surface of the product is strictly prohibited from contact with acid-alkaline solvents (such as benzene, alcohol, etc.), which may cause discoloration, fading and resistance degradation of the surface of the product. If cleaning is required, the cloth may be wiped with a neutral solution (such as water).
2. The glue used should be compatible with the bottom of the table mat product and the workbench material. It is not only firmly bonded, but also does not shrink after the product sticks. It is recommended that the test be pasted before mass production.
3. Product shrinkage: The product contains more glue than the general table mat, the durability is increased, and the tensile strength is increased. It is recommended that the product specifications be extended and relaxed during the cutting, and stored for 24 hours, so that the product has a fatigue recovery process, and then Glue bonding production.
Anti-static mats are mainly made of a variety of processes using conductive materials, static dissipative materials and synthetic rubber. The top layer is a static dissipative layer of about 0.3-0.5 mm thick, and the bottom layer is a conductive layer of about 1.5-1.7 mm thick. The mat has a long-lasting use, has good acid, alkali and chemical resistance, and is wear-resistant and easy to clean. The length is generally 10m, the width is 1.0m, 1.2m, and the available surface colors are: green , gray, blue, black, etc. Can be divided into matt or bright special conditions can be processed according to customer requirements.