Sticky Mat Is Based On A Multi-layer Composite Structure

Apr 02, 2025 Leave a message

The structural layer design of the sticky mat is based on a multi-layer composite structure. The specific layers are as follows:

How to use sticky mat

Sticky floor mats

STICKY MAT

1. ‌Total number of layers and functional layer divisions ‌ Sticky mats are usually composed of ‌32 layers‌, of which ‌30 layers‌ are core functional layers with sticky coatings, and the remaining 2 layers are non-sticky protective layers‌.

2. ‌Material and function of each layer‌ ‌Surface layer (1st layer): Adhesive-free transparent PE film is used as the initial protective layer to prevent adhesion to other items when not in use‌. ‌Middle layer (2nd–31st layer): Contains 29 layers of glued PE film (mainly sky blue, other colors can be customized) and 1 layer of glued double-sided PE protective film. Each layer is coated with an environmentally friendly water-soluble acrylic adhesive, which has balanced adhesion and no glue shedding, and is specially used to capture dust from soles or wheels‌. ‌Bottom layer (32nd layer): It is a double-sided PE sky blue protective film with a label of "30" or "1" to fix the mat and prevent it from sticking to the ground before use‌. ‌

3. Label design
The functional layer (layers 2–31) is labeled with a number label of "1-30" or "30-1" on the lower left or right corner to facilitate peeling off layer by layer and tracking the progress of use.
4. Function of protective layer
Both the top and bottom layers are designed as non-sticky protective layers to ensure integrity during transportation and storage; when using, you need to tear off the bottom protective layer first to fit the ground, and then remove the top layer to activate the dust sticking function.
This layered structure is easy to replace through modular design, while taking into account environmental protection and efficient dust removal needs.