Talk about the things that need to be paid attention to for anti-static plastic film
The anti-static plastic film is suitable for the protection and preservation of documents, photos, newspaper clippings, specimen books, catalogues, restaurant menu office documents and other graphic materials. Generally, the thicker the plastic film, the higher the heating temperature of the laminator. Generally, 80mic~125mic needs a temperature of 90~100℃; 125mic~150mic needs a temperature of 110~130℃; 175mic~200mic needs 130~ A temperature of 150°C. Such a plastic sealing effect will have a high degree of adhesion, good flatness, and small edge sealing gap.
Anti-static plastic film is a material used to plasticize paper, generally containing plastic components (PET+EVA), and is widely used for plastic sealing of identity cards, work cards, driving licenses, student cards, representative cards, marriage certificates, etc. It is waterproof, Dust-proof, moisture-proof, anti-static, anti-fading, anti-aliasing, anti-breakage, anti-counterfeiting, anti-corrosion, high temperature resistance, low temperature resistance, increased clarity and three-dimensional sense, etc., which are convenient for long-term storage. It is the power of your life and office work helper.
When the anti-static plastic film is plasticized, if the setting temperature is too low, the picture will be blurred and it will cause incomplete sealing; it is enough to set the temperature again and re-sealing. If the temperature is too high, the film will be wrinkled due to overheating Fold, even roll the sheet into the machine. At this time, use the "temperature adjustment" knob to reset the temperature. Note for shutdown: In order to prolong the service life of the laminator, the heating power must be turned off first, and the power switch can be turned off after the machine drops below 80°C (about 5 minutes).
After molding, the anti-static plastic film may be very hot and soft. Please be careful. Use a book or other flat and heavy objects to press down on the plastic to help keep the surface flat.