Tearing Method Of Sticky Mat

Aug 24, 2018 Leave a message

Change from now on - tearing method of sticky mat


Recently, many customers have come to call for advice on how to properly use the sticky mat to get the most out of it. After communication, many customers have some problems in the tearing method. Here's how to get it right.

 STICKY MAT.jpg

1. Find the color label on the edge of the mat;

 

2. Pick up the label and slowly peel off the film layer from the edge of the mat;

 

3. Continue to peel the film upwards and separate it from the mat until the four corners are separated from the mat;

 

4. Pull the four corners of the separation into the middle of the mat to form a tent;

 

5. Slowly separate the film in the middle of the mat;

 

6. Fold the film inward until it is small enough to be discarded.

 

7. The contaminated film should be thrown outside the locker.

 04.jpg

These steps ensure that dust particles do not leak out of the film. The staff can't tear the label and tear off the film from the mat, but should follow the above steps to slowly peel off the film.

 

The sticky mat is mainly placed between the entrance of the clean space and the buffer zone of the air shower. It can effectively remove the dust on the sole and the wheel, and minimize the influence of dust on the quality of the clean environment, thus achieving easy dust removal. The effect solves the problem that the dust removal of other floor mats is not complete and cannot guarantee the dust.