The composition and use of sticky dust
The sticky mat is made of multiple layers of polyethylene film, and each layer is attached with a high-viscosity coating. It is smooth and durable, and can quickly and effectively eliminate dirt and dust on the soles of the shoes and keep the working environment clean. When using the sticky mat, first remove the protective layer of the rubber surface from the opening on the back, and then place it flat on a clean and water-free access floor, and use the sole to flatten the sticky mat on the ground. Tear off the protective layer from the opening on the front so that it can be used. If the surface of the film is covered with dust during use, remove this layer from the opening so that the next clean film can be used. The sticky mat is made of a piece that has been treated and has no gas leakage, and is highly viscous. It is used to remove dust and dirt from shoes in clean rooms and in the aisles of areas with purification requirements.
The sticky mat is non-slip and pollution-free, and will not be damaged by shoes or wheels. Stick and remove dirt when touching. Just tear off the upper layer to use the new mucosa, no need to mop or wash. It can be used alone or combined with the frame. The bottom cushion can be adhered to the ground, easy to remove and leave no trace. Each layer has the same size, and there will be no defects or pollution caused by gaps. The remaining amount is marked on the corners of the sticky mat. It is not convenient to remove the upper layer and easy to tear off the contaminated layer after use. Tear off the protective paper on the sticky pad and push the dust removal wheel in one direction on the sticky pad to remove the adsorbed dust and impurities. When the adhesive surface of the dust-sticky paper is seriously polluted and the viscosity drops, the next layer should be replaced in time to ensure the dust removal effect. The sticky mat has strong adhesive force, does not lose glue, can be used more than 100 times, and has a shelf life of 1 to 3 years. There are two types of white background and yellow background. Specifications: 24mm*33mm*50 layers. This product is a cleaning consumable for silicone rollers and can provide more than 98% of the dust removal surface for the cleaning roller.