The correct procedure for using anti-static wrist straps
The anti-static wrist strap is a commonly used device in anti-static equipment. It is used in many production lines. Its main function is to conduct static electricity from the human body to the earth. However, if used improperly, the anti-static wrist strap will not do anything at all. Function, the editor below will teach you the correct process of using the wrist strap.
First: the user needs to put his hand into the anti-static wrist strap. During this process, it should be noted that there should be no clothing between the human skin and the wrist strap, and the lock can be tightened.
Second: Insert the ground wire of the anti-static wrist strap into the hole of the wrist strap, and then connect the other end to the ground socket. During this process, it should be noted that the ground socket of the anti-static wrist strap must always be connected to the ground.
Third: Anti-static wrist straps cannot be used all the time, because workers will continue to wear out the connecting wires of the wrist straps while working. Long-term wear and tear will cause the copper wires inside the connecting wires to disconnect. An anti-static wrist strap generally Generally speaking, the usage time limit is about 1-3 months. Therefore, the anti-static wrist strap needs to be tested regularly during use to ensure the normal use of the wrist strap.
Fourth: After using the anti-static wrist strap for a certain period of time, it needs to be replaced even if it is not completely damaged. Because internal losses will cause the conductive function of the wristband to decline, making it unable to properly guide static electricity from the human body, it must be replaced in time.
The above are the correct procedures for using the anti-static wrist strap. Of course, the user should also be careful not to pull the connecting wire of the wrist strap too hard, otherwise the copper wire inside the connecting wire will easily break.