The ion fan is not only a static elimination device but also a sterilization device.
The ion fan is not only a static elimination device, but also a kind of ** device. It is basically the same as the ultraviolet lamp ** principle. It uses the high-voltage electrode to turn the oxygen in the air into ozone for the purpose of **. Generally, the ion fan has a size, and its effective inoculation range is different according to different models, and should be used correctly according to the instructions.
(1) Ion fan inoculation requirements are carried out in a closed room;
(2) The metal part of the ion fan is susceptible to fumigation by aerosols such as sulfur or aerosols. When fumigation, the ion fan should be taken out of the department, and the metal part in front of the ion fan should be covered when spraying **. Prevent positive and negative discharges;
(3) Spray 2% to 3% of coal phenol soap or 5% of new Jieermin aqueous solution in the room half an hour before inoculation. After purifying **, open the ion fan again, and inoculate in the effective range of 20-30 cm in front of the ion fan after 5 minutes. ;
(4) The power supply voltage is required to be stable. Generally, the rural power consumption is large at night, and the voltage is low, which does not meet the requirements of **, and can be used when the voltage is stable during the day;
(5) After using the ion fan, the dust on the positive and negative electrodes should be rubbed frequently with cotton and alcohol. The amount of excessive ionized ozone will be reduced and the effect will not be achieved.
(6) The vaccination personnel should not face the ion fan during the inoculation process, try to stagger the facial part and the wind fan wind part to prevent the symptoms of dizziness and nausea caused by insufficient oxygen supply to the brain.