For clean clothes, many people think that it is a piece of clothing in the near future. Except for the amount of dust that is less than that of ordinary clothes, there is nothing special about it. You don’t have to use it in any environment. If you still have this idea, Then the anti-static net Xiaobian has to say that the clean clothes can only exert its most effective dust-proof effect under its specific conditions.
The dust-free suit can control the tiny dust generated by the human body to the maximum extent, so that the tiny dust does not spread to the air polluting products and equipment, and the qualified dust-free clothing also has the function of anti-static and anti-dust adsorption, and the anti-static Performance must be long-lasting, efficient, and not attenuated by daily washing and friction. It is generally composed of coveralls, boots, protective gloves, hoods, face protection and eye protection. The clothing can protect people and protect the craft. With products.
The dust-free clothing requires that it cannot become a dust source, and at the same time, it must also prevent the spontaneous dust and anti-static generation of the human body. The dust-free anti-static fabric is also called anti-static ultra-clean fabric, which is different from the ordinary anti-static fabric. To have good dust filter, the dust particles in the clean room mainly come from indoor flowing air and active human body. In order to achieve such a protective effect, the dust-free clothing requires that the fabric cannot be used as a dust source for the clean room. This determines that only long fibers of chemical synthesis can be used, and natural fibers such as cotton, hemp, and silk cannot be used for ultra-clean. Fabric! However, increasing the dust filter rate is at the expense of fabric and breathability, so fabrics with loose weave are not suitable for use in clean rooms.
The dust-proof effect of the clean clothes depends on a variety of conditions. Only when the above conditions are met can the effect of a clean clothes be maximized to protect people and protect products and equipment.