What are the hazards of ESD during SMT processing and patching?
What is ESD?
ESD is the abbreviation of English electronstaticdischarge, the original meaning is electrostatic discharge, usually also refers to the protection of electrostatic discharge (that is, we usually say static protection or anti-static);
ANSI/ESDS20.20 is the standard for static protection in the SMT processing and production process of the American Electrostatic Discharge Association. It is the most authoritative standard for electrostatic protection in the electronics industry in the world, and the only static protection standard that can be certified. The company has passed the ANSI/ESDS20.20 certification, which indicates that the static electricity has been strictly controlled in the production, thus ensuring the quality of the products and ensuring the reliability of the products.

Static electricity and electrostatic discharge are ubiquitous in our daily lives, but for electronic devices, a slight electrostatic discharge that we can't detect can cause serious damage. The rapid development of electronic technology has made electronic products more powerful and smaller, but this is at the expense of the increasing electrostatic sensitivity of electronic components. This is because high integration means that the unit wiring will become narrower and narrower, and the ability to withstand electrostatic discharge is getting worse. In addition, the materials used in a large number of newly developed special devices are also electrostatically sensitive materials, thus allowing Electronic components, especially semiconductor materials, are increasingly required for electrostatic control of process environments such as SMT processing, production, assembly and maintenance.
On the other hand, in the environment of electronic product SMT processing, production, use and maintenance, a large number of various polymer materials that are easy to generate static electricity are used, which undoubtedly brings more difficulties and challenges to the electrostatic protection of electronic products. .

Electrostatic discharge has two kinds of damage and damage to electronic products: sudden damage and potential damage. The so-called sudden injury refers to the device being seriously damaged and losing its function. This type of damage can usually be detected in the quality inspection of the production process, so the main cost to the factory is the cost of rework maintenance.
The potential damage refers to the partial damage of the device, the function has not been lost, and can not be found in the detection of the production process, but the use of the product will become unstable, good or bad, and thus constitute a greater quality of the product. Hazard. Of these two types of damage, potential failures account for 90%, and sudden failures account for only 10%. That is to say, 90% of the electrostatic damage is not detected, and will only be discovered when it is used by the user. Most of the problems such as frequent crashes, automatic shutdown, poor voice quality, loud noise, good signal time difference, and key error occur in mobile phones. Because of this, electrostatic discharge is considered to be the biggest potential killer of electronic products, and electrostatic protection has become an important part of electronic product quality control. The difference in stability between domestic and foreign brands of mobile phones also basically reflects their differences in electrostatic protection and anti-static design of products.

In fact, the electronics industry has been paying attention to static electricity for a long time. From the emergence of electronic products, especially transistors, this problem has begun to be recognized and valued by enterprises and countries. The research on static electricity and static electricity protection has gradually evolved into a new edge discipline, forming modern electrostatic engineering and electrostatic protection engineering, including the principle of electrostatic electrification, electrostatic discharge model, electrostatic mechanism, electrostatic hazard and its Protection and related electrostatic testing techniques have been rapidly developed.
Although humans have discovered static electricity for thousands of years, for the electronics industry, static protection is far from simple. This is because:
First, the complexity of materials and articles in SMT processing patch production process:
The manufacture of electronic products will be carried out from the processing and assembly of components SMT, to the assembly, and to the use of semiconductors, metals, various packaging materials, circuit board substrates, chassis, chassis and other raw materials. Equipment, operating tools, operating environments, packaging containers, and the like, in turn, make it possible to have a greater variety of items and materials that may come into contact with electronic devices. Contact separation, friction, induction, etc. between materials will generate static electricity, and many of these articles use polymer insulation materials that are easily generated by static electricity, which will undoubtedly increase the risk of electrostatic damage and static electricity of electronic products. The difficulty of protection.
Second, electronic products SMT processing and production links, any failure of a link will cause static protection failure:
The manufacturing process of electronic products, from semiconductor materials to final assembly, goes through semiconductor manufacturing, wafer, mounting, fixing, bonding, packaging, circuit board manufacturing, SMT processing, soldering, plugging, assembly, testing, etc. Hundreds of processes in different parts of the process, static electricity on any one of the links may cause damage to the device. Once the static protection of which part is insufficient, it means that the final product has a problem. The systematic control of static electricity throughout the process is also an important feature of electrostatic protection in the electronics industry.
Third, personnel factors in SMT processing patch production will increase the difficulty of electrostatic protection:
Despite the increasing automation of modern electronic production, it is impossible to leave personnel operations throughout the manufacturing process. Compared with the activities of machine personnel, the operation of the device is much more complicated, so the protection of human body static electricity is much more complicated than the equipment and environment. At the same time, as the master of production, the awareness of personnel anti-static and the level of operation of static electricity protection will ultimately determine whether static protection is effective. These will increase the difficulty of electrostatic protection.
Fourth, SMT processing devices are becoming more and more sensitive, and the requirements are becoming more and more strict:
Advances in electronic technology can be said to be an increase in integration and the use of new semiconductor materials, and an increase in integration means a reduction in the ability of the device to withstand electrostatic breakdown. The minimum linewidth of today's integrated circuits has dropped to 45nm, which means that the theoretical breakdown resistance according to 10MV/CM is only 45V, which may be only 1/20 of the static voltage generated when we bend over a piece of paper, while others In the field, such as the production of static electricity in the hard disk industry, the requirements for static control have dropped below 5V, which must pose new challenges for electrostatic protection.

