What aspects should be paid attention to when using the ion fan
Pay attention when using the ion fan 1. The use environment should always be kept clean, the surface of the ion fan should be kept clean, and there should be no debris at the air inlet and outlet. Regularly remove dust and other sundries in the ion fan and pipe. 2. It can only operate when the ion fan is completely normal. Tongjin must maintain sufficient capacity of power supply facilities and stable voltage. It is strictly forbidden to run without phase. The power supply line must be a dedicated line, and temporary lines should not be used for long-term power supply. 3. During the operation of the ion fan, it is found that the fan has abnormal noise, the motor is seriously heated, the casing is charged, the switch trips, and cannot be started, etc., it should be stopped immediately for inspection. In order to ensure safety, maintenance is not allowed while the fan is running. After the maintenance, a test run should be carried out for about five minutes, and the machine should be turned on after confirming that there is no abnormal phenomenon. 4. Replenish or replace the lubricating grease for the bearings from time to time according to the environmental conditions of use (the motor sealed bearing does not need to be replaced during the service life). In order to ensure good lubrication of the ion fan during operation, the number of refueling times should not be less than 1000 hours / time, seal the bearing and the motor bearing, fill 2/3 of the inner and outer rings of the bearing with lubricating grease. It is strictly forbidden to run without oil. 5. The ion fan should be stored in a dry environment to avoid the motor from being damp. When the ion fan is stored in the open air, rainproof measures should be taken. In the process of storage and handling, the fan should be prevented from bumping to avoid damage to the ion fan.