What Is A Grounding System Monitor And Its Features

Jan 24, 2022 Leave a message

What is a grounding system monitor and its features


The biggest blind spot of the grounding system lies in the invisible grounding wires and grounding rods under the ground, or the grounding wires in the wall or under the work table. The problem is often overlooked by people; and the general measurement is only limited to the measurement on the ground, and it is impossible to go deep into the ground to make a real-time accurate and complete measurement.


"Grounding" is the most economical and effective way to eliminate static electricity. A complete and effective grounding should include grounding and grounding, and must be monitored 24 hours a day to avoid bad grounding (or open circuit) and still be aware of "blind spots" "Or in an environment with high human error or a high-production value work area that is extremely sensitive to electrostatic damage, extra caution must be taken to prevent the expensive electrostatic protection measures already installed on the ground from falling short.

According to the latest specification ANSI/ESD S20.20 of the American Electrostatic Protection Association and the latest specification IEC-61340 of the European Electrostatic Protection Association, the clear requirements for electrostatic grounding in the electrostatic protection area (EPA) should ensure effective electrostatic grounding at all times, Complete compliance with this requirement with this unique digital, 24-hour electrostatic grounding system monitor.


Grounding System Monitor Features:

1.24 hours continuous monitoring of grounding monitoring function instrument, LCD can display the current date, time and grounding resistance value in real time.

2. Automatic alarm function, real-time monitoring and alarm of the grounding system status.

3. The monitoring resistance value of the grounding system is adjustable (0-1999Ω). When the loop resistance of the ground wire is higher than the set value, it will immediately alarm with sound and light. The instrument can upload the quantity to the computer through RS485, and the computer will display what date and what date. Time, the size of the resistance value to the ground, the offline instrument has an automatic storage function (the software needs to be purchased separately).

4. When the grounding system is disconnected, the sound and light alarm is carried out, which effectively improves the reliability of the grounding system, and is suitable for workplaces that require high grounding resistance values.

5. Easy to use, no need to bury auxiliary grounding facilities.

6. It can overcome the blind spot of grounding measurement, completely measure the real grounding impedance on and under the ground, and avoid electrostatic damage and electric shock.