What is the principle of antistatic products?



First, the basic principle of electrostatic protection 1, inhibit the accumulation of static charge; 2, eliminate the static charge that has been generated. Second, the basic measures to eliminate static electricity measures to eliminate static electricity, generally can be attributed to a "ground"; second, "device" (static eliminator); three rely on "agent" (plus antistatic agent); four by "shield" . 1. Grounding is to connect some anti-static products or other equipment to a ground wire.
A buried line method is used to establish an "independent" ground line. The resistance between the ground wire and the earth is <10Ω, which is the charge that may accumulate on the discharge conductor. The static electricity accumulated on the conductor (such as the human body) is usually grounded by grounding. Grounding is implemented by the following methods: 1 The human body is grounded through the wrist strap. 2 The human body is grounded through anti-static shoes (or shoelaces) and an anti-static floor.
3 The work surface is grounded. 4 test equipment, tool holder, soldering iron grounding. 5 anti-static floor, grounding pad. 6 anti-static transfer vehicles, boxes, racks as grounded as possible. 7 Anti-static chair is grounded. 2. Electrostatic Eliminator Ionizer and ion wind gun are good static eliminators. The principle is to generate a large amount of positive and negative ions on the static eliminator, and then blow these ions into the static place by the wind, the static electricity will attract the opposite pole. The neutral ions are neutralized, and the static electricity accumulated on the surface of the product or device is thus neutralized and eliminated.
3. Using a static eliminator The static eliminator can be used to wash the surface of the instrument and the object, and the static electricity on the surface of the object can be quickly eliminated. The antistatic agent uses fats and oils as raw materials, and its main component is quaternary ammonium salt. Its function is to make the surface of chemical fiber, rubber, plastic and other objects adsorb moisture in the air and increase the electrical conductivity. 4. The most common method of electrostatic shielding is to use electrostatic shielding bags and anti-static turnover boxes as protection. Static sensitive components will be exposed to static electricity during storage or transportation. Electrostatic shielding can weaken external static electricity to electronic components. influences.
5. Controlling the humidity of the environment When the relative humidity of the air is above 65-70%, the surface of the object tends to form a very thin film of water. The water film can dissolve the CO2 in the air, so that the surface resistivity is greatly reduced, and the static charge is less likely to accumulate. If the relative humidity of the surrounding air drops to 40-50%, the static electricity is not easily dissipated, and it is possible to form a high potential. A common method of increasing the humidity of the air is to spray water into the air.
6. The anti-static function of the object can directly shield the tool or leak static electricity. For example, spray the material with a layer of conductive liquid. Or through grounding to prevent the generation of electrostatic potential difference: the place where the work will come into contact with the working object is connected to a common potential (usually ground), so that there is no potential difference, even if there is static electricity, no spark will be generated (because the potential is same).

