Why Should We Wear Anti-static Clothing In The Electronics Workshop?

Feb 21, 2019 Leave a message

During normal production activities, the operator wears factory uniforms between external media surfaces (such as countertops, chairs, tools, appliances, etc.), between layers of work clothes, between underwear and skin, until the soles are worn. Between the floor and the floor, clothing and shoes are charged due to frequent contact separation and friction, especially when wearing high-performance chemical fiber clothing. The static charge of the clothing and shoes is gradually dispersed to the entire surface according to the law of the charge on the medium, and a certain static voltage is formed on the garment when the balance is reached. Of course, since the human body itself is a good conductor, the charging of the overalls will cause the human skin to be charged around the body due to electrostatic induction, and a certain static voltage is also formed. Thus, for the operator, there are two possible discharge channels; one is the discharge between the fingertip (skin) and the ground conductor, and the other is the discharge between the work clothes and the ground conductor. Both of these discharges can cause damage to static-sensitive devices. Although the anti-static wristband eliminates the first type of discharge hazard, it does not eliminate the second discharge hazard. This is because the wristband can only eliminate static electricity on the human skin as a good conductor, and it is impossible to leak static electricity on the more insulative clothing. People often only notice the elimination of static electricity on human skin, while neglecting or not paying enough attention to eliminate static electricity in clothing, which needs improvement.



        When the human body performs various activities, the static voltage value on the clothing has greatly exceeded the electrostatic discharge damage threshold of many electrostatic sensitive devices, and the sensitive device may be damaged when touching or approaching these components. It should also be pointed out that it is generally considered that wearing cotton overalls can prevent the static accumulation of clothing and thus it is safe, and the actual view is one-sided. This is basically the case when the relative humidity of the air is higher than 50%; and when the relative humidity is relatively low, the charge amount of the pure cotton product is significantly increased. Tests have shown that at a relative humidity of less than 30%, the charge of a cotton fabric is comparable to that of polyester; and when the relative humidity is less than 20%, the charge of a cotton fabric is even higher than that of some chemical fabrics. Therefore, in a dry climate, it is not expected to use any cotton products to eliminate the electrostatic hazard of clothing under any circumstances.



     Anti-static overalls refer to work clothes that are sewn with anti-static fabric as a fabric to prevent static build-up on clothing. The antistatic fabric is a fabric obtained by mixing conductive fibers or antistatic synthetic fibers or a mixture of the two at substantially equal intervals or evenly during weaving. The conductive fiber is a general term for fibers made of a conductive material or a subconductive material using metal or organic materials in whole or in part, and has a volume resistivity ρv ~ between 104 and 109 Ω·cm. According to the distribution of the conductive component in the fiber, the conductive fiber can be classified into three types: a conductive component uniform type, a conductive component covering type, and a conductive component composite type. At present, most of the anti-static fabrics are made of conductive fibers, especially the conductive component composite type, that is, the composite fiber is used most.