Anti-static bracelet alarm function
The principle of electrostatic bracelet alarm, static electricity is an invisible killer! Invisible and intangible, the voltage of several thousand volts in an instant may cause fatal damage to delicate and small electronic parts! Electrostatic protection must be meticulous and meticulous. Good grounding becomes the top priority. The traditional alligator clip directly clamped to the ground cannot meet the requirements of electrostatic protection. The electrostatic ring is frequently swayed and bent during work. Winding and other actions clearly show that a good electrostatic ring has problems. In fact, static electricity cannot be completely eliminated. Electronic parts are inexplicably damaged. What is bad brings us a lot of waste of materials and working hours! Use the gold-collar wrist strap to alarm and monitor whether the electrostatic grounding is good at any time, so as to reduce and prevent various defects caused by electrostatic discharge! Model: ZYX-209-1 Product introduction: ZYX-209-1 can carry out real-time continuous monitoring and control of anti-static wrist straps. The entire grounding system can be monitored in real time; it can ensure the normal use of the grounding system in the anti-static work area (individual, two or more persons). This product ensures that the ESD status of operators is 100% monitored.
The electrostatic ring monitor complies with the latest standard ANSI/ESD S20.20 of the American Electrostatic Protection Association and the latest standard IEC-61340 of the European Electrostatic Protection Association. The clear requirements for electrostatic grounding in the electrostatic protection area (EPA) should be ensured at all times. Electrostatic grounding, using this ZYX-209-1 full-time real-time electrostatic grounding system alarm, which has changed the traditional electrostatic grounding method. 1. Performance description
1. Real-time monitoring of the operator's wearing of the electrostatic wrist strap and the ground connection to the earth, and an automatic alarm will be triggered immediately in case of abnormal conditions.
2. It is easy to use and can correctly judge the contact between the ground wire of the ground and the ground wire of the workbench.
3. It can be set according to design needs, generally set to 1.068-2. 0MΩ (±5%), which conforms to international standards, and monitoring parameters can also be set freely.
4. Microcomputer chip control, no debugging, plug and play.
5. Good reliability and strong anti-interference ability.
6. High sensitivity. When the static discharge path fails for ≥0.1 seconds, the monitor will alarm.