Anti-static grounding method
The anti-static table is anti-static grounding, and the grounding resistance is required to be less than 1 ohm. The method is to connect the grounding points of the tables in parallel with the wires and then introduce the total grounding point. Can equipment grounding and electrostatic grounding be connected to a large location at the same time? What is the principle? How to measure.
A 1 megaohm resistor is connected in series with the grounding wire supplied by all antistatic suppliers. The purpose is that static electricity will not hurt or break down the ESD device due to excessive current during discharge. The grounding of the device cannot be the same as static electricity. If the grounding is not handled, the same grounding point is connected. The electrostatic grounding needs to be completed by a professional anti-static supplier. It is not a simple access to the earth. Generally, the grounding device is designed separately or the earth is grounded in series, but not It is recommended that manufacturers with sensitive components be grounded. There are still many, typing is slow, if you want to know, then contact. As for the principle you said, I want to explain to you, what is anti-static? That is, the process in which static electricity is introduced into the earth through an antistatic body having a resistance value of 10 to 5 to the 11th power of the eleventh is antistatic. This is also the case, anti-static grounding can not be confused with ordinary grounding.