Anti-static rubber mat has several grounding points
Anti-static rubber is generally applied to countertops, shelves or floors, and no matter where it is applied, as long as the purpose of laying includes "anti-static", the anti-static rubber must be grounded. If it is applied to non-ground positions such as countertops or shelves, generally only need to use anti-static grounding buckle to ground. It should be noted that any anti-static rubber sheet must be installed separately regardless of whether it is in contact with other anti-static rubber sheets. An anti-static grounding buckle.
If it is laid on the ground, it is necessary to use anti-static grounding copper mesh tape to connect the grounding copper foil and grounding wire, and the number of anti-static grounding copper mesh tape is related to the laying area: first, no matter the size of the laying area, at least two Anti-static grounding copper mesh belt, if the area is larger than 140 square meters, at least one anti-static grounding copper mesh belt needs to be added for every 30 square meters of the part exceeding 140 square meters. It should be noted that the "laying area" refers to the area of the anti-static rubber laid on the connected ground copper foil. For example, two adjacent rooms are connected by a door, one is 130 square meters, and the other is 30 square meters, they are all covered with anti-static rubber and the anti-static rubber is in close contact with the door frame, it looks like a whole, but in fact the ground copper foil of the two rooms is not connected, so although it seems that only three anti-static Static grounded copper mesh belt, but in fact both rooms must have at least two anti-static grounded copper mesh belts.