The following matters should be noted when measuring the static tester:
(1) To prevent electrostatic discharge from occurring during measurement, the measuring instrument should be slowly approached to the charged body. This should be the case even for explosion-proof instruments.
(2) It should be convenient to use and highly reliable. Explosion-proof type should be used for measurement in explosion hazardous areas.
(3) Measurement analysis The risk of detonation caused by measurement. The measurement shall be carried out after the risk of ignition is excluded; and emergency measures in the event of an accident shall be considered in advance.
(4) Read the instructions of the instrument carefully before measuring to understand its measurement principle and scope of use.
(5) The same item should be measured several times, and in the case of good reproducibility, take the average and maximum values.
(6) Before the lake is withered, adjust the sensitivity and select the range.
