Don't let the wrong cleaning method harm your anti-static clothing
The most important part of the management of anti-static work clothes is cleaning. Although the fiber itself is a clean fiber that is difficult to get dirty, how to maintain it is an important factor, that is, the method of cleaning.
If the anti-static clothing is washed by ordinary washing methods, it will of course be dirty on the contrary. If you wash it yourself, do not scrub it hard, be gentle, avoid exposure to the sun, and dry it in the shade. It is recommended that anti-static work clothes should be sent to a professional washing company. Improper personal washing can easily cause damage to the product and shorten its service life. Therefore, a special method must be used-dust-free purification cleaning.
Professional dust-free clothing cleaning uses treated sand-filtered water and pure water for cleaning. The rinsing process uses deionized water with a resistivity of 18 megohms/cm. The cleaning agent used is a non-ionic surfactant with a neutral pH value. Use dust-free washing machines and dryers, and the air used for drying is filtered by high-efficiency filters; after dust-free cleaning, drying, packaging, and inspection are all carried out in a Class 100 clean room environment; this is the quality assurance of professional companies in cleaning. If anti-static clothing is washed in an ordinary room, dust and bacteria will be attached and contaminated by cleaning agents!
During dust-free cleaning, since solvents that are destructive to the protective performance of anti-static clothing cannot be used for cleaning, it is inevitable that some clothes will have stains that cannot be washed off after anti-static clothing is washed. These stains usually have no effect on the performance of clean clothes. When the performance of a batch of work clothes shows a significant decline, a professional cleaning company will provide an inspection report on the performance of the anti-static clothing, indicating whether the work clothes have reached the limit of scrapping.