The electrostatic induction perimeter detector is a very reliable and sensitive sensor device. This detector can be reliably compatible with all alarm host systems and monitoring alarm linkage systems that accept switching signals, and constitutes perimeter protection for various functions. system.
Working principle: an electrostatic field is set in the protection area. When the intruder interferes (closes, touches, cuts, or climbs) the electrostatic field, the detection processor confirms that the amplitude, direction and speed satisfy the alarm condition, and immediately The host sends an on or off signal to alarm, usually the host uses the micro-processing alarm zone.
System features: 1 This system can adapt to a variety of complex terrain, not subject to the terrain height, twists, corners, etc., leaving no dead ends, breaking the limitations of infrared, microwave walls, etc. can only be limited to the use of line of sight and flat areas . 2 This system is essentially different from the high-voltage power grid. It has absolute safety and will not cause sparks. It can be widely used in inflammable and explosive places such as ammunition depots, and will not endanger life. 3 The system has a strong overall defense and damage prevention capabilities. Regardless of the "close, touch, cut, and over" alarms, the sensing sensitivity can be set according to the specific use of the user.
