Evaluation criteria for antistatic textiles

Mar 04, 2019 Leave a message

China's current national and industry standards for antistatic performance testing of textiles and clothing mainly include: GB/T12014-1989 "Antistatic Workwear", GB/T12703-1991 "Textile Electrostatic Test Method", FZ/T01042-1996 "Textile Materials" Determination of static voltage half-life of electrostatic properties", FZ/T01044-1996 "Determination of fiber leakage resistance of electrostatic properties of textile materials", FZ/T01059-1 999 "Method for determination of fabric friction electrostatic adsorption", FZ/T01060-1999 "Fabric friction Method for Measuring Charge Charge Density", FZZY0 1061-1999 "Method for Measuring Frictional Electric Voltage of Fabrics".


 


It must be noted that the applicability of different test method standards is different. Taking GB/T12703-1991 "Textile Electrostatic Test Method" as an example, this method provides several different test methods. Not only the test items are different, the technical conditions are different, and the applicable products are also different, and the meanings are different. Such as:


 


Method A (half-life method, same as FZ/T01042-1996): The sample placed on the optional metal platform was discharged with a high voltage of +10 kV for 30 s, and the half-life (s) of the induced voltage was measured. This method can be used to evaluate the electrostatic attenuation characteristics of fabrics, but the contact state of the samples containing conductive fibers on the grounded metal platform cannot be controlled. When the conductive fibers are in good contact with the platform, the charge leaks quickly, and the attenuation rate of the contact is poor and the ordinary textiles. Similarly, the test results obtained by the same sample under different placement conditions are extremely different, so it is not suitable for the evaluation of antistatic properties of fabrics containing conductive fibers.


 


Method B (triboelectric voltage method, basically the same as FZ/T01061-1999): 4 pieces of sample (2 by 2 latitude, 4 cm × 8 cm) are placed on the drum, and the drum is rotated at 400 r/min. Standard cloth (nylon or polypropylene) friction, test the maximum value (V) of the sampled voltage within 1min. Because the sample size is too small, the distribution of conductive fibers will vary greatly with the sampling position for fabrics with embedded conductive fibers, so it is not suitable for the evaluation of antistatic properties of textiles containing conductive fibers. .


 


Method C (charge surface density method, basically the same as FZ/T01060-1999): The amount of charge measured by the Faraday cylinder after the sample is rubbed with the nylon standard cloth in a specific manner under specified conditions, and the charge surface density is obtained according to the sample size. (μC/m2). The charge surface density method is suitable for evaluating various fabrics, including the difficulty of accumulating static electricity by friction-containing fabrics, and the measured results have a close correlation with the degree of ash absorption of the samples. Since the triboelectric charging between the sample and the standard cloth is realized by manual operation, the consistency of the test conditions, the accuracy and reproducibility of the test results are susceptible to the operation method.


 


D method (clothing charge method at the time of undressing): After the work clothes are rubbed against the chemical fiber underwear in a specific manner, the work clothes are taken off, and the Faraday cage is put in, and the charge amount (μC/piece) is obtained. The test object of this method is limited to clothing, but because the material of the underwear is not specified, the friction method is difficult to be consistent and lacks comparability.


 


Looking at the existing national standards and industry standards for electrostatic testing of textiles, the practical method for testing the electrostatic properties of fabrics containing conductive fibers is only the charge surface density method in GB/T12703-1991 or FZ/T01060-1999. Therefore, the evaluation of the antistatic properties of textiles does not insist on finding a certain correlation between different indicators, but should establish a complete and multi-faceted evaluation system to reflect the textile under different test conditions and conditions. Antistatic properties and actual use. Some experts suggest that for the existing charge surface density method, the relevant test technical conditions should be further studied and improved, and the artificial friction should be changed to automatic operation to further improve the accuracy and reproducibility of the test.