Grounding specification requirements for anti-static workbenches
1. The composition of the anti-static workbench is mainly composed of anti-static table mats, workbenches, wrist strap joints and grounding wires.
2. There must be more than two wrist strap joints on the anti-static table. One is for people who need to operate, one is for technical people, and the other is for inspection people.
3. It is not allowed to pile up debris on the anti-static workbench, such as plastic boxes, rubber, cardboard, glass, etc. As long as they are prone to static electricity, do not pile them randomly.
4. The use of anti-static wrist strap requires that people who directly touch electrostatic sensitive devices must wear an anti-static wrist strap, because the wrist strap has good contact with our skin, and the resistance value of the wrist strap system to the ground should be 1MΩ.
5. Anti-static work clothes should also be worn well. People who enter the electrostatic work area and those who come into contact with SMD components must wear them, especially in dry environments where the humidity is less than 50%. Electrostatic work clothes must comply with relevant standards.
6. Wear anti-static work shoes. If you are wearing ordinary shoes, use static shoe harness, anti-static shoe cover or heel strap.
Are there any requirements for the wiring of the anti-static workbench? Now everyone knows, so, when you use the anti-static workbench, you can refer to it, so as to achieve better use requirements.