How is the anti-static workbench grounded
The anti-static workbench has an anti-static function, not only because the desktop uses an anti-static table mat, but also a very important factor is the anti-static ground wire. A workbench without an anti-static grounding wire will not function as an anti-static. The anti-static ground wire releases the static electricity generated by the entire anti-static workbench to the ground. So how do you connect the ground wire? Let's take a look below:
Use a stranded copper-core flexible cord or cable with a cross-sectional area of not less than 2m㎡ to connect the antistatic table mat and the ground mat to the ground wire configuration system in series, respectively, so that the antistatic workbench is successfully grounded.
The work surface adopts anti-static fire-proof board or anti-static table mat, and the main frame uses metal materials. With good grounding measures and excellent antistatic performance. The main frame is equipped with adjusting feet to properly adjust the height of the workbench. A cable configuration box can be reserved on the workbench and there are several sets of multifunctional power sockets, which are convenient to match the lighting system. In addition, there is a workbench made of stainless steel. The tabletop needs to be laid with an antistatic table mat. The table mat is connected to the ground through contact lines to achieve the effect of discharging static electricity.
The anti-static workbench is mainly composed of an anti-static worktop, a workbench support, and accessories. The antistatic workbench is classified according to its composition. If it is classified according to its performance, it can be roughly divided into two parts: static conductive antistatic workbench and dissipative antistatic workbench. The static conductive antistatic workbench is mainly used in clean rooms, because all static conductive antistatic workbenches The metal structure is composed of no wear and dust during work and no pollution to the clean room. The dissipative antistatic workbench will dust due to frequent wear to pollute the clean room. The main stand of the antistatic workbench is It plays a supporting role. In addition, its metal support can put classic anti-static floor on. The work surface is the focus of the anti-static work table. The main work surface has anti-impact, corrosion resistance, stable performance and other physical and chemical properties. In order to ensure that the components are not damaged or damaged by static electricity, when testing the anti-static workbench, it is necessary to ensure the accuracy of the measurement method. If the performance does not meet the specifications, you must remember to replace them in time to ensure the safety of the components.