How to clean the esd boots professionally
ESD boots are professional shoes made of special materials with good anti-static effect and low dust generation. They are widely used in places with high cleanliness such as microelectronics, medicine, aerospace and so on. Due to the strict requirements, clean boots need to be cleaned and cleaned, and more attention to detail is required in the purification and cleaning of clean boots.
First, esd boots are sorted. After receiving the used dust-free boots, a professional purification and cleaning company sorts them first, and sorts the dust-free boots according to the different pollution conditions of the dust-free boots after use. Before cleaning, check the use of the dust-free boots. If the dust-free boots are damaged, they must be repaired first. Then select the dust-free shoes with a deeper degree of pollution and decontaminate them first. The next step is to purify and clean the dust-free boots. Put the dust-free shoes into the special purification washing machine, and after cleaning, transfer the dust-free shoes to the special purification shoe drying machine for drying.
Secondly, the inspection and testing of dust-free boots after cleaning and drying is also particularly important. The cleaned dust-free shoes are processed for numbering, and the dust-free shoes can be further checked while the number is being matched. If there are still contaminants remaining on the upper, the dust-free boots need to be purified and cleaned again. The cleanliness test of clean boots can be measured with a professional tester. Of course, the anti-static performance test of dust-free boots is also a must-have test.
Finally, after the entire purification, cleaning, inspection and testing are completed, the next step is to purify and vacuum the clean boots to ensure the cleanliness of the clean boots to meet the requirements of the clean room for the dust generation of the clean boots. After packaging and sealing, it can be delivered to customers.