How to wear an anti-static wrist strap correctly
In some electronics and microelectronics enterprises, in order to avoid static electricity from damaging electronic devices, workers should not only take appropriate anti-static measures in the workplace, but also pay attention to the installation of various switch components, especially circuit boards, which must be worn Anti-static wrist strap. The anti-static wrist strap effectively releases the static electricity of the human body through grounding, preventing the product from being struck by static electricity.
If the anti-static wrist strap is improperly operated, it will not have any effect at all. Only by using it correctly can it have the effect of static electricity protection. Here is how to wear the anti-static wrist strap correctly by Jie Di for science popularization:
Step 1: Put your hand into the anti-static wrist strap.
Step 2: Tighten the lock and make sure that the anti-static wrist is in good contact with the skin.
Step 3: Insert the anti-static wrist strap into the socket of the anti-static wrist strap of the switch chassis, or clip it to the grounding pole of the chassis with an alligator clip.
Step 4: Make sure that the wrist strap is well grounded. The anti-static wrist strap needs to be used with a grounded socket, and two wrist straps can be connected to one grounded socket.
The above is the correct way to wear and use the anti-static wrist strap, and also remind you to keep a wrist strap tester and test it at any time, so as to ensure the anti-static effect of the anti-static wrist strap.