Installation and use method of human body static elimination equipment
Base-type static elimination ball, first connect the ground wire to the screw (the ground wire is easy to use not less than 0.3 square multi-strand wire is connected to the lead of the ground wire), there is a small hole in the ball seat, and the ball post and the base After the installation is complete, if there is static electricity in the body, just touch the metal ball on the top for 0.1s with your finger to eliminate the static electricity of the human body. (The indicator light turns on once and then goes out. It is obvious at night and not obvious during the day.) If there is static electricity in the body If it is less than 100V or there is no static electricity, the static indicator will not light up.
Non-base static elimination ball: First, bury one end of the ball static eliminator in the ground at least 200mm, and the other end of the ball faces upwards, and the installation is completed.
maintenance:
No sundries, especially metal objects, enter the steel pipe, because there are circuit components inside, and the circuit cannot work normally if it enters the metal object.