Installation of SL-031 Two-foot Human Comprehensive Tester
1. The characteristics of the SL-031 two-foot human body comprehensive tester can quickly test ESD equipment, and three independent devices (wrist strap, left shoe, right shoe) can complete ESD testing at one time.
2. There are three status displays for each of the three, LO (below the set value), PASS (within the set value range), and HI (above the set value) with alarm function.
3. Low battery indicator, when the BATTERYLOW light is on, it reminds the user to replace the battery in time! Otherwise, the accuracy of the test parameters will decrease (*better use the power adapter DC9V)
Use operation
1. Before use, set the battery switch to the ON position. If the display is abnormal or the buzzer keeps beeping, it means that the battery in the machine is under power. Please plug in the power adapter to charge and start the machine directly. The static DC current is less than 9V/40mA.
2. During the ESD test, as long as both feet are on the opposite metal pedals, the wrist strap is worn or inserted into the wrist wiring product, and the finger is lightly pressed on the metal test button to know at a glance whether the ESD equipment is qualified. Note: Do not wear gloves or press the metal test button with your nails. use correctly.
installation
1. Pass the bottom of the wiring bracket on the pedal out of the top.
2. Three sets of M8*30MM fix the bracket and the pedal.
3. Insert the wiring into the opposite plug-in wire at the bottom of the instrument.
4. Lift the bracket up and down the locking button to lock the height of the brackets.