SL-035 wrist strap tester
The SL-035 tester is a three-state contact tester designed to perform (functional) tests on ESD personal grounding devices quickly and repeatedly. This product is used as one of the inspection tools for the implementation of 6.1.3.2 "Compliance with verification requirements, and verification also includes daily inspections of the technical requirements plan" in ANSIESDS20.20.
Slade SL-035 wrist strap tester incorporates a unique test circuit design, which can not only increase the test speed, a single wrist strap tester. Slade SL-035 wrist strap tester is equipped with 750KΩ-10.5MΩ circuit (used to test wrist straps) Slade SL-035 wrist strap tester is an ideal choice for testing wrist straps.
The test parameters have been preset in the factory, but they must be adjusted to the same parameters before they can be used. The Slade SL-035 wrist strap tester is simple and convenient to operate. The green light signal reminds the user that everything is normal. The red light and sound prompt indicate that the resistance of the circuit is too high or too low.
Slade SL-035 Wrist Strap Tester This tester can verify whether there is a path between the operator, the wrist strap and the ground wire.
A. When wearing a wrist strap, insert the end of the (wire) plug into the socket on the front of the tester.
B. Press the test button to start the tester, and the tester can be started within 2-3 seconds. Note: During the test, never touch the metal parts.
C, the green light "Normal (PASS)" LED light is on, indicating that the wrist and the grounding wire device are functioning normally.
D. If the "LO" or "HI" LED lights up and an audible alarm is issued, the wearer of the wrist strap should check whether the wrist strap device is normal