Ion air gun maintenance method

Feb 21, 2025 Leave a message

Ion air gun maintenance method

Ionizing air gun sl-004c

Ionizing air gun

sl-004c ion air gun

1. Power supply and air source requirements

① The power supply must have a ground wire and ensure full grounding. The transformer must ensure good grounding. Check whether the ground wire knob is tightened before each use.

② The air source used must be effectively filtered. Sometimes a secondary filter device is required. The filter should be cleaned in time. Otherwise: water, oil and dust/dust particles will enter the ion generating chamber and adhere to the inner wall of the plastic part. When accumulated to a certain extent, the ion needle will ignite it. As a result, the plastic parts gradually form honeycomb char damage, and the ion removal amount gradually decreases; in particular, it creates safety hazards.

2. Adjustment of static electricity removal effect

① Static electricity removal effect Static electricity removal time is inversely proportional to air pressure. The air pressure should be 0.3Mpa-0.7Mpa.

② The distance and angle between the gun head, the nozzle head and the electrostatic field affect the effect of static electricity, and attention should be paid to debugging until satisfaction is achieved.

3. Daily maintenance

① The air gun/nozzle head is easy to break. Be careful to prevent collision when using the air gun, and be careful to prevent falling after use. Even if the air nozzle is fixed, be careful to prevent collision with objects.

②Apply a moderate amount of universal anti-rust lubricant to the air pressure regulating valve of the air gun.

③When cleaning the ion needle and ion needle chamber of the ion air gun, use anhydrous alcohol instead of thinner. When cleaning, turn off the power first, then use a tweezer to unscrew the small plastic cover (also called air accelerator) in front of the ion air gun head, and use a cotton swab dipped in anhydrous alcohol to clean the ion needle and the inner cavity of the ion needle chamber, and clean the stains and dirt inside.

④It is best to add a foot switch to the air supply of the ion air gun, or control it through a solenoid valve and mechanical action linkage, which can not only improve the use effect, but also extend the service life.