Ionizing air blower principle

Oct 09, 2018 Leave a message

Electrostatic generation and Ionizing air blower principle

The charge transfer occurs due to the presence of electric charge and electric field, so that two energies of opposite polarity are called electrostatic. Static electricity is not static electricity. Static electricity is the same in nature as common electricity. It is essentially electric charge. Static electricity is everywhere, even in an environment where static protection is not possible, there is no possibility of static electricity at all. It can only reduce the possibility of static electricity generation. The most scientific, objective and direct method of testing with antistatic test related instruments is the most standardized. At present, there are not many instruments that can test the antistatic index of electronic components on the market, and the electrostatic high-voltage instruments for testing the finished products of electronic products are like a cow. These two are different and should be noted.


 It is recommended to test antistatic instruments for semiconductor components: Japan STACLEAN series LED antistatic tester, American ETS semiconductor antistatic tester, Taiwan Zhengmao LED chip comprehensive test system, Japan Kikusui semiconductor test instrument, Agilent semiconductor test instrument, etc. . If the LED anti-static ability is not high, you can consider introducing some anti-static measures for electronic products: such as the use of anti-static ion tuyere and anti-static ion fan, anti-static mat, anti-static clothing and so on. The antistatic index of the LED can only be tested with a special semiconductor static discharge simulation tester, and can not be tested with the electrostatic gun of the kind of arc discharge. In the antistatic test of LED, static electricity must be directly applied to the two pins of the LED. The discharge waveform of the instrument has strict standard regulations. Even if the test instrument directly applied 10KV to the human body, it was almost undetectable. But the kind of electrostatic gun - the operation is not easy to hurt the human body, let alone the direct electric man, the consequences are not optimistic.


LEDs belong to the class of semiconductor devices and have corresponding electrostatic discharge simulation test standards. The more common and authoritative in the world are: ANSI-ESDSTM 5.1.2-1999 of the International Electrostatic Association. JESD22-A114/115 of the Joint Committee on International Electronic Devices. The US military standard "MIL-STD-883" has a description of the device static test specification. Human body mode: When static electricity is applied to the measured object, a 330 ohm resistor is applied in series. This is to simulate the charge transfer when the person is in contact with the device. The contact between the human and the object is usually also 330 ohms, so it is called the human body mode. Mechanical mode: Static electricity is directly applied to the device under test. The simulation tool mechanically transfers the electrostatic charge directly to the device, so it is called mechanical mode. The internal electrostatic charge storage energy and discharge waveform of the two test instruments are also somewhat different. The results of the human body model test are generally 8-10 times that of the mechanical mode. In the LED industry, many companies now use the indicators of the human body model. LEDs can be referenced to the current state of the art electrostatic classification (ANSI) standard voltage class classification: 0 <250V antistatic ability is very very poor, very vulnerable to electrostatic damage, poor quality, dead lights are beyond control. It does not have antistatic ability under normal circumstances. Class 1A 250-500V The antistatic ability is very poor, it is easily damaged by static electricity, the quality is also very poor, dead lights often appear, and almost no antistatic ability in general environment. Class 1B 500-1000V has poor antistatic ability and is also subject to electrostatic damage. The quality is poor and dead lights occasionally appear. There is also a degree of antistatic ability. 1C grade 1000-2000V Anti-static ability is generally not easy to be damaged by static electricity. Stronger static electricity will also damage LED, and the quality is general. Class 2 2000-4000V has good antistatic ability and is not susceptible to electrostatic damage. In general, static electricity will not damage the LED and the quality is good. Class 3A 4000-8000V has good antistatic ability, is hard to be damaged by static electricity, and will not damage LED under strong static environment, and the quality is good. Class 3B >8000V Antistatic ability is very good, it is difficult to be damaged by static electricity, there is almost no possibility of electrostatic damage, and the quality is very good. According to our continuous testing and continuous accumulation in the past 5 years, combined with the situation in the past year, the LED market is very chaotic. The anti-static indicators range from 250V to 8000V, and many of them are mixed with fish. Filled up. On the whole, some of the LED antistatic levels are now improving rapidly, and their quality has improved.


Ionizing air blower, also known as the ion static eliminator, is one of the static eliminators. The principle of the ion fan to eliminate static electricity is to generate static electricity by neutralizing the static electricity by generating air ions. Then, how does the ion fan generate ionized air? The ion fan ionizes the air. The process of generating air ions is done in three ways: the first is air corona ionization under strong electric field conditions. Producing positive and negative ions; second, making air molecules into air ions under the action of A and β rays; and third, high energy rays (X-rays) acting on air to ionize the base