Knowledge about 2018 labor insurance esd products

esd mat ground cord.jpg

General knowledge of labor insurance products 1. Anti-static clothing In order to prevent the static electricity from accumulating clothes, the overalls sewn with anti-static fabric as the fabric are anti-static clothes. Wear requirements: (1) The area of the gas explosion hazardous area is zone 0, zone 1 and the minimum ignition energy of combustibles is below 0.25 MJ. Antistatic clothing should be worn. (2) It is forbidden to wear and detach in flammable and explosive places. (3) It is forbidden to attach or wear any metal objects on the anti-static clothing. (4) When wearing anti-static clothing, it must be worn with anti-static shoes. 2, anti-static rubber shoes can eliminate the static accumulation of human body in time, but also prevent the electric shock of the power supply below 250V electric shock shoes for anti-static shoes. Wear requirements: (1) Wear anti-static rubber shoes in places where static electricity may cause static electricity and explosion, and places where electrical equipment below 250v can accidentally cause electric shock and fire to human body. (2) In order to ensure the elimination of static electricity in the human body, when wearing anti-static rubber shoes, the resistance of the ground should be no more than 1.0*108 ohms. (3) In the process of wearing the shoes, the bottom of the anti-static rubber shoes shall not be exposed to insulating impurities. (4) In the process of wearing the shoes, it is not possible to wear thick socks with strong insulation or wool and insulating insoles at the same time. 3. Hard hat The hat that protects the human head from external damage is a safety helmet. It is composed of a cap shell, a cap lining, a chin strap, and a rear hoop. Wear requirements: (1) At the high-altitude operation site, overhaul construction site or cross-work site, workers must wear helmets when entering. (2) Wearing a helmet in a dangerous place must be fastened to prevent it from falling off. (3) If the cap and cap lining are aged or damaged, the impact resistance and penetration resistance are reduced, and the new cap may be replaced. 4, safety belts High-level workers Pezza protective equipment to prevent falling casualties is a seat belt. It consists of a strap, a rope, and a metal fitting. (1) High-level workers must wear seat belts to work. (2) Seat belts should be hung low and low, pay attention to prevent swing collision, use 3M or more long rope should add buffer. (3) The damper, the speed difference device and the self-locking hook can be used in series. (4) It is forbidden to knot the rope, and it is not allowed to hang the hook directly on the safety rope. It should be hung on the connecting ring. (5) All parts on the seat belt should not be arbitrarily removed. Pay attention to the rope set when replacing the new rope.

ESD TAPE CUTTER.png