Quickly solve the problem of industrial dust adsorption
The key to solving the problem of dust adsorption is to solve the problem of electrostatic charge.
The general method of removing dust and static electricity:
Clean air dust (weak)
Increase in environmental humidity (invalid)
Install static eliminator (effective)
(Air cleaning dust) The most commonly used method of dust removal is to blow dust by blowing air to the object, but the friction between the air and the object may generate static electricity, so that the dust can be adsorbed on the object again. Need to use static eliminator (Ionized air nozzle, ionized air gun is recommended, ionized air snake can be combined with compressed air for blowing).
in principle:
It uses AC high voltage and is connected to a dedicated emitter electrode to ionize the air to generate positive and negative ions, and then transport it to the surface of the static object to be eliminated by compressed air, and neutralize the positive and negative ions. Electrostatic charge can realize efficient and reliable electric dust removal. purpose.
Ion air gun / ion air nozzle / ion air snake is suitable for local dust removal and dust removal.
●Dust is adsorbed on the chip
●Adhesion of chips during processing of resin products
●Foreign objects were mixed in the tablet packaging process
If you need a larger and larger range of electrostatic dust removal, you can use the ion bar series and ion fan series.
Ion rod series: suitable for widely eliminating static electricity.
●Film adhesion
●Non-woven fabric vacuum
●Dust adsorption on printed matter
Ionization fan series: suitable for medium-range static elimination
●Static electricity and dust removal on the workbench of the assembly line
●The feeder is clogged with dust
●Dust absorption on the circuit board
Our company is committed to static elimination and static detection. Among them, ion fan, ion rod, ion wind nozzle, ion wind gun, ion wind snake, electrostatic tester, electrostatic sensor are the core products. This product is widely used in industrial production industry and electronics industry.