What are the requirements for laying anti-static rubber mat
Nowadays, in order to effectively prevent the inconvenience caused by static electricity in people's work, people have adopted anti-static rubber to avoid the damage of static electricity, especially in laboratories with many computer appliances, where the colors of blue, green, gray, etc. are different The laying and installation of the anti-static rubber skin greatly eliminates and prevents the generation of static electricity, so that the electrical appliances reduce the breakdown of static electricity. So in order to effectively achieve the anti-static function, what should we pay attention to when laying the rubber? Let us see the advice given to us by professional anti-static rubber installation workers:
First, check the laying environment. The environment is to operate at the ambient humidity not greater than 60% and the temperature not higher than 25°C. At the same time, check whether the base ground to be laid is flat and clean. When the ground is uneven, use a tool to level it and remove the debris.
Second, arrange work. Use a ruler to measure the square size of the room, the layout of electrical equipment, and formulate a reasonable laying method and plan according to the size of the anti-static rubber. Here are a few things that need to be mastered: 1. When the square size of the room is not easy to match the rubber size, it is necessary to find the center point of the length and width direction of the room, and then compare the size difference. If the size difference is large, install it from the inside to the outside with a symmetrical grid. When the size difference is small, use the method of laying directly from the outside to the inside. 2. Because the process of laying rubber involves finding, dividing, and other tasks, install it When using anti-static rubber, you must first install an adjustable bracket with a beam, and use a small line and a level to adjust its height, which is used to divide the grid line and the elevation line.
Third, install and test. Every time you install it, you must ensure that it passes the resistance test, and if it does not meet the requirements, you must reinstall it to avoid the anti-static function of the anti-static rubber can not meet people's requirements.