What is the calibration frequency of the ion blower?
In addition to static electricity, the ion fan plays a very important role, which can be applied in almost all industries, but after a period of time, the ion fan needs to be calibrated, that is to say, it is tested in all directions and its standards are recorded. Compare the parameters with the factory data. If the data deviates, the manufacturer must cooperate with the maintenance to restore its standard effect. However, the different working environment of the ion fan and its frequency of use indirectly affect its calibration frequency.
Under normal circumstances, the ion blower must be calibrated once every six months. Under the standard operating environment and duration, the calibration should be carried out by professional ESD department personnel. This slight adjustment can be independently operated by the relevant departments. If the operating environment of the ion fan is more susceptible to pollution, the frequency of use of the fan is very high, almost 24 hours without shutting down, the entire ESD control is also relatively strict, the frequency of calibration at this time is relatively short, once every 3 months, even Some of them are proofread once a month; while some factories may not be very strict in preventing and controlling static electricity. In this case, calibration may be carried out once a year, and some may simply ignore this link.
Only those with a certain scale and an ESD control department will definitely perform calibration tests on the ion blower in use. This is also the performance of strict control of production. Determine in advance whether the ion blower can work normally and maintain a high efficiency. Prevent it from affecting the entire production process, otherwise the consequences and losses will be even greater. KESD's ion fan is also one of the best continuous use effects among domestic static elimination equipment, which greatly reduces the efficiency of calibration.