Why should electronic products be anti-static?
Because most of the electronic products have circuit boards, and there are components such as capacitor diodes on the power board, they generally allow the current to pass through very small. If the static electricity of the human body is more, it will be generated after the electricity on the circuit board is followed. The current can be damaged by the breakdown of the components, so the general electronics factory should wear anti-static clothing and wear insulated gloves!
Due to the rapid development of electronic technology, electronic devices are becoming smaller and smaller, and electrons with very high integration can be mass-produced, resulting in smaller and smaller wires and thinner and thinner insulating films, resulting in higher breakdown voltages. The lower. The electrostatic voltage generated by electronic equipment during production, transportation, storage and transshipment far exceeds its breakdown voltage threshold, which may cause breakdown or failure of the device, affect the technical specifications of the equipment, and reduce its reliability. . It can be seen that static electricity is a major obstacle in the development of the electronics industry. Therefore, the prevention of static electricity must be mentioned on the agenda to ensure the quality of the equipment.
In order to protect the electronic devices and equipment from static electricity during purchase, storage, distribution, inspection, storage, commissioning and installation, the production workshop must be equipped with anti-static products, including personal static products, static elimination equipment, and defense. Electrostatic tools, etc., these can not be less.